W12E is a trapeziform passive two-way speaker which is specially designed for entertainment facilities or fill speaker.

W12E features a 44mm compression HF driver with polyester diaphragm which is fit for short
distance sound performance and a 12" MF/LF driver which adopts nonmetallic diaphragm that brings softer sound than titanium version. The reserved 10 M10 rigging points ensure easy setup and angle adjustment for fixed installation and tour show.W12E also features a 35mm pole mount socket at the bottom. The enclosure is formed by 15mm and 24mm plywood with waterproof and wearable black texture finish.W12E is integrated with two handles at both sides for convenient hand carry.

W15 is a trapeziform two- way speaker with passive driven mode which is specially designed for entertainment
facilities or fill speaker.W15E features a 75mm compression HF driver with titanium diaphragm and a 15"MF/LF driver made with high precision processing. So W15E performs with solid mid frequency and clean exquisite high frequency.

The reserved 12 M10 rigging points ensure easy setup and angle adjustment for fixed installation and tour
show.W15E also features a 35mm pole mount socket at the bottom. The enclosure is formed by 18mm and
24mm plywood with waterproof and wearable black texture finish.W15E is integrated with two handles at
both sides for convenient hand carry.

W215B features 2 PCS specially designed LF drivers which are installed into the front board of the V-shape
loaded horn. It makes good use of the enclosure volume. So it not only performs as a direct radiated phase
inverted enclosure but also as strong and speedy like a horn speaker. The optimum tuning design places the
phase tube behind the V-shape horn far from the grille then it could help to reduce the air noise under large
dynamic range and deliver purer sound under big power output.
The compact enclosure works well with fast response of the driver ensuring the LF speed. The horn structure
increases the power of the low frequency. And the large phase inverted tube increases the output of the ultra
low frequency and reduce the non linear distortion so then W215B features both powerful and thick sound
action.
W215B is formed by 24mm and 18mm plywood with waterproof and wearable black texture finish. W215B is
integrated with two handles at both sides for convenient hand carry. There are 4 pieces silica gel feet
designed at the bottom and one side respectively. The 4-Pin SPEAKONS are in parallel connection. There is a
piece of acoustic form covered under the grille which could provide better protection towards the
components.

W218B is desinged for all applications that require high low frequency SPL.
Unique enclosure design reaching 35Hz low frequency, featuring powerful punch and fast transient rangethat will replay completely with the low frequency in the music.