TH1012 includes one 75mm voice coil compression driver incorporating titanium diaphragm edged with
Mylar, and handling output 400W. The compression driver is coupled to a 90-degree horizontal and

60-degree vertical horn, which can be rotated. The cabinet has 10 rigging points for an
easy installation.

TH1015 includes one 75mm voice coil compression driver incorporating titanium diaphragm edged with
Mylar, and handling output 450W. The compression driver is coupled to a 60-degree
horizontal and 40-degree vertical horn, which can be rotated. The cabinet has 10 rigging points for an
easy installation.

TH1025 includes one 75mm voice coil compression driver and two 15-inch drivers 75mm voice coil.
The compression driver uses titanium diaphragm edged with Mylar, and is coupled to a 90-degree
horizontal, 60-degree vertical horn, which can be turned, to make the sound design more flexible.
Above 350Hz, where less power is required, the crossover feeds full signal to one of the two 15-inch
drivers and rolls off the other. This technique elimites interference between the drivers that would occur
at shorter wavelengths. The cabinet has 10 rigging points points for an easy installation.

th1218b subwoofer is specially designed for high sound pressure output of low frequencies.
It can be used in almost all kinds of venues which need high output in low frequency range.
It includes two 18-inch cone drivers, specially designed for TH1000 series. The low
frequency range can be extended to 35Hz.

Lower distortion and higher output can be acquired in the range from 30Hz to 50Hz.
The subwoofer can bring you powerful impacts as well as delicate transients.